Transducer Lab

At Transducer Lab, the goal is to produce drivers that accurately transform the original signal to an acoustical signal with minimal alteration.

Quality is a factor as well. The drivers are carefully assembled and tested in lab conditions.

Transducer Lab tweeters are matched to better than +/- 0.75db. Each tweeter is thoroughly tested and evaluated to meet our standard specifications.

The ceramic domes on the models N26C, N27B4 are sintered from Al2o3 and B4C material. You will notice the purity of the dome by its finish. The domes operate in pure piston motion to well above the audible range.

The N28BE is a high purity Beryllium dome tweeter with advanced design and premium parts to match. Response to above 55khz with a natural airy sound.

These premium fidelity drivers that are designed and assembled in the USA.
 


 

Tweeter


open a bigger photo

Transducer Lab N26C-A (Aluminium Voice-Coil)       order no. tl-N26C-A       EUR 167,00 excl. VAT: € 140.34 / $ 167.00
26 mm dome tweeter with ceramic dome. The speaker has a 3 mm solid metal front plate.
  • power handling (continuous/programme) = 100 W
  • frequency range = 1000-35000 Hz
  • resonance frequency fs = 560 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 4,3 Ohm
  • force factor BL = 4,4 N/A
  • effective piston radiating area Sd = 5,8 cm2
  • effective mechanical mass incl. air load mms = 0,46 g
  • total Q factor Qts = 0,23
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 90 mm
  • overall diameter d = 135x108,5 mm
  • mounting depth (not countersunk) t = 35,5 mm
PDF data sheet

open a bigger photo

Transducer Lab N26C-T (Titan Voice-Coil)       order no. tl-N26C-T       EUR 149,00 excl. VAT: € 125.21 / $ 149.00
26 mm dome tweeter with ceramic dome. The speaker has a 3 mm solid metal front plate.
  • power handling (continuous/programme) = 100 W
  • frequency range = 1000-35000 Hz
  • resonance frequency fs = 570 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 4,3 Ohm
  • force factor BL = 4,4 N/A
  • effective piston radiating area Sd = 5,8 cm2
  • effective mechanical mass incl. air load mms = 0,45 g
  • total Q factor Qts = 0,24
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 90 mm
  • overall diameter d = 135x108,5 mm
  • mounting depth (not countersunk) t = 35,5 mm
PDF data sheet

open a bigger photo

Transducer Lab N26C-G (Glass Fiber Voice-Coil)       order no. tl-N26C-G       EUR 167,00 excl. VAT: € 140.34 / $ 167.00
26 mm dome tweeter with ceramic dome. The speaker has a 3 mm solid metal front plate.
  • power handling (continuous/programme) = 100 W
  • frequency range = 1000-35000 Hz
  • resonance frequency fs = 580 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 4,3 Ohm
  • force factor BL = 4,5 N/A
  • effective piston radiating area Sd = 5,8 cm2
  • effective mechanical mass incl. air load mms = 0,43 g
  • total Q factor Qts = 0,24
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 90 mm
  • overall diameter d = 135x108,5 mm
  • mounting depth (not countersunk) t = 35,5 mm
PDF data sheet

open a bigger photo

Transducer Lab N26K-A (Aluminium Voice-Coil)       order no. tl-N26K-A       EUR 167,00 excl. VAT: € 140.34 / $ 167.00
26 mm dome tweeter with kevlar dome. The speaker has a 3 mm solid metal front plate.
  • power handling (continuous/programme) = 95 W
  • frequency range = 1000-35000 Hz
  • resonance frequency fs = 410 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,1 Ohm
  • force factor BL = 3,1 N/A
  • effective piston radiating area Sd = 5,9 cm2
  • effective mechanical mass incl. air load mms = 0,35 g
  • total Q factor Qts = 0,22
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 90 mm
  • overall diameter d = 130x106 mm
  • mounting depth (not countersunk) t = 42 mm
PDF data sheet

open a bigger photo

Transducer Lab N26KR-A (Aluminium Voice-Coil)       order no. tl-N26KR-A       EUR 167,00 excl. VAT: € 140.34 / $ 167.00
26 mm dome tweeter with kevlar dome. The speaker has a 3 mm solid metal front plate.
  • power handling (continuous/programme) = 95 W
  • frequency range = 1000-35000 Hz
  • resonance frequency fs = 410 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,1 Ohm
  • force factor BL = 3,1 N/A
  • effective piston radiating area Sd = 5,9 cm2
  • effective mechanical mass incl. air load mms = 0,35 g
  • total Q factor Qts = 0,22
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 90 mm
  • overall diameter d = 120 mm
  • mounting depth (not countersunk) t = 42 mm
PDF data sheet

open a bigger photo

Transducer Lab N26KL-A (Aluminium Voice-Coil)       order no. tl-N26KL-A       EUR 167,00 excl. VAT: € 140.34 / $ 167.00
26 mm dome tweeter with kevlar dome. The speaker has a 3 mm solid metal front plate.
  • power handling (continuous/programme) = 95 W
  • frequency range = 1000-35000 Hz
  • resonance frequency fs = 440 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92,5 dB (2,83V; 1m)
  • DC resistance Re = 4,1 Ohm
  • force factor BL = 3,1 N/A
  • effective piston radiating area Sd = 5,9 cm2
  • effective mechanical mass incl. air load mms = 0,33 g
  • total Q factor Qts = 0,21
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 90 mm
  • overall diameter d = 130x106 mm
  • mounting depth (not countersunk) t = 42 mm
PDF data sheet

open a bigger photo

Transducer Lab N26KLR-A (Aluminium Voice-Coil)       order no. tl-N26KLR-A       EUR 167,00 excl. VAT: € 140.34 / $ 167.00
26 mm dome tweeter with kevlar dome. The speaker has a 3 mm solid metal front plate.
  • power handling (continuous/programme) = 95 W
  • frequency range = 1000-35000 Hz
  • resonance frequency fs = 440 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92,5 dB (2,83V; 1m)
  • DC resistance Re = 4,1 Ohm
  • force factor BL = 3,1 N/A
  • effective piston radiating area Sd = 5,9 cm2
  • effective mechanical mass incl. air load mms = 0,33 g
  • total Q factor Qts = 0,21
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 90 mm
  • overall diameter d = 120 mm
  • mounting depth (not countersunk) t = 42 mm
PDF data sheet

open a bigger photo

Transducer Lab N26CR2-A (Aluminium Voice-Coil)       order no. tl-N26CR2-A       EUR 189,00 excl. VAT: € 158.82 / $ 189.00
26 mm dome tweeter with ceramic dome. The speaker has a 3 mm solid metal front plate.
  • power handling (continuous/programme) = 95 W
  • frequency range = 800-35000 Hz
  • resonance frequency fs = 380 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91,5 dB (2,83V; 1m)
  • DC resistance Re = 4,1 Ohm
  • force factor BL = 3,1 N/A
  • effective piston radiating area Sd = 5,8 cm2
  • effective mechanical mass incl. air load mms = 0,39 g
  • total Q factor Qts = 0,21
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 90 mm
  • overall diameter d = 120 mm
  • mounting depth (not countersunk) t = 42 mm
PDF data sheet

open a bigger photo

Transducer Lab N26CR2-G (Glass Fiber Voice-Coil)       order no. tl-N26CR2-G       EUR 189,00 excl. VAT: € 158.82 / $ 189.00
26 mm dome tweeter with ceramic dome. The speaker has a 3 mm solid metal front plate.
  • power handling (continuous/programme) = 90 W
  • frequency range = 800-35000 Hz
  • resonance frequency fs = 390 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,1 Ohm
  • force factor BL = 3,2 N/A
  • effective piston radiating area Sd = 5,8 cm2
  • effective mechanical mass incl. air load mms = 0,38 g
  • total Q factor Qts = 0,21
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 90 mm
  • overall diameter d = 120 mm
  • mounting depth (not countersunk) t = 42 mm
PDF data sheet

open a bigger photo

Transducer Lab N26CS-A (Aluminium Voice-Coil)       order no. tl-N26CS-A       EUR 189,00 excl. VAT: € 158.82 / $ 189.00
26 mm dome tweeter with ceramic dome. The speaker has a 3 mm solid metal front plate.
  • power handling (continuous/programme) = 95 W
  • frequency range = 800-35000 Hz
  • resonance frequency fs = 380 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91,5 dB (2,83V; 1m)
  • DC resistance Re = 4,1 Ohm
  • force factor BL = 3,1 N/A
  • effective piston radiating area Sd = 5,8 cm2
  • effective mechanical mass incl. air load mms = 0,39 g
  • total Q factor Qts = 0,21
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 90 mm
  • overall diameter d = 130x106 mm
  • mounting depth (not countersunk) t = 42 mm
PDF data sheet

open a bigger photo

Transducer Lab N26CS-G (Glass Fiber Voice-Coil)       order no. tl-N26CS-G       EUR 189,00 excl. VAT: € 158.82 / $ 189.00
26 mm dome tweeter with ceramic dome. The speaker has a 3 mm solid metal front plate.
  • power handling (continuous/programme) = 90 W
  • frequency range = 800-35000 Hz
  • resonance frequency fs = 390 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,1 Ohm
  • force factor BL = 3,2 N/A
  • effective piston radiating area Sd = 5,8 cm2
  • effective mechanical mass incl. air load mms = 0,38 g
  • total Q factor Qts = 0,22
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 90 mm
  • overall diameter d = 130x106 mm
  • mounting depth (not countersunk) t = 42 mm
PDF data sheet

open a bigger photo

Transducer Lab N26CF-A (Aluminium Voice-Coil)       order no. tl-N26CF-A       EUR 178,00 excl. VAT: € 149.58 / $ 178.00
26 mm dome tweeter with carbon dome. The speaker has a 3 mm solid metal front plate.
  • power handling (continuous/programme) = 100 W
  • frequency range = 1000-35000 Hz
  • resonance frequency fs = 400 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,1 Ohm
  • force factor BL = 3,1 N/A
  • effective piston radiating area Sd = 5,9 cm2
  • effective mechanical mass incl. air load mms = 0,37 g
  • total Q factor Qts = 0,22
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 90 mm
  • overall diameter d = 130x106 mm
  • mounting depth (not countersunk) t = 42 mm
PDF data sheet

open a bigger photo

Transducer Lab N26CFR-A (Aluminium Voice-Coil)       order no. tl-N26CFR-A       EUR 178,00 excl. VAT: € 149.58 / $ 178.00
26 mm dome tweeter with carbon dome. The speaker has a 3 mm solid metal front plate.
  • power handling (continuous/programme) = 100 W
  • frequency range = 1000-35000 Hz
  • resonance frequency fs = 400 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,1 Ohm
  • force factor BL = 3,1 N/A
  • effective piston radiating area Sd = 5,9 cm2
  • effective mechanical mass incl. air load mms = 0,37 g
  • total Q factor Qts = 0,22
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 90 mm
  • overall diameter d = 120 mm
  • mounting depth (not countersunk) t = 42 mm
PDF data sheet

open a bigger photo

Transducer Lab N26MG-A (Aluminium Voice-Coil)       order no. tl-N26MG-A       EUR 178,00 excl. VAT: € 149.58 / $ 178.00
26 mm dome tweeter with magnesium dome. The speaker has a 3 mm solid metal front plate.
  • power handling (continuous/programme) = 100 W
  • frequency range = 900-35000 Hz
  • resonance frequency fs = 430 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,1 Ohm
  • force factor BL = 3,1 N/A
  • effective piston radiating area Sd = 5,9 cm2
  • effective mechanical mass incl. air load mms = 0,33 g
  • total Q factor Qts = 0,2
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 90 mm
  • overall diameter d = 130x106 mm
  • mounting depth (not countersunk) t = 42 mm
PDF data sheet

open a bigger photo

Transducer Lab N26MG-G (Glass Fiber Voice-Coil)       order no. tl-N26MG-G       EUR 178,00 excl. VAT: € 149.58 / $ 178.00
26 mm dome tweeter with magnesium dome. The speaker has a 3 mm solid metal front plate.
  • power handling (continuous/programme) = 95 W
  • frequency range = 1000-35000 Hz
  • resonance frequency fs = 440 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92,5 dB (2,83V; 1m)
  • DC resistance Re = 4,1 Ohm
  • force factor BL = 3,2 N/A
  • effective piston radiating area Sd = 5,9 cm2
  • effective mechanical mass incl. air load mms = 0,32 g
  • total Q factor Qts = 0,21
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 90 mm
  • overall diameter d = 130x106 mm
  • mounting depth (not countersunk) t = 42 mm
PDF data sheet

open a bigger photo

Transducer Lab N26MGR-A (Aluminium Voice-Coil)       order no. tl-N26MGR-A       EUR 178,00 excl. VAT: € 149.58 / $ 178.00
26 mm dome tweeter with magnesium dome. The speaker has a 3 mm solid metal front plate.
  • power handling (continuous/programme) = 100 W
  • frequency range = 900-35000 Hz
  • resonance frequency fs = 430 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,1 Ohm
  • force factor BL = 3,1 N/A
  • effective piston radiating area Sd = 5,9 cm2
  • effective mechanical mass incl. air load mms = 0,33 g
  • total Q factor Qts = 0,2
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 90 mm
  • overall diameter d = 120 mm
  • mounting depth (not countersunk) t = 42 mm
PDF data sheet

open a bigger photo

Transducer Lab N26MGR-G (Glass Fiber Voice-Coil)       order no. tl-N26MGR-G       EUR 178,00 excl. VAT: € 149.58 / $ 178.00
26 mm dome tweeter with magnesium dome. The speaker has a 3 mm solid metal front plate.
  • power handling (continuous/programme) = 95 W
  • frequency range = 1000-35000 Hz
  • resonance frequency fs = 440 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92,5 dB (2,83V; 1m)
  • DC resistance Re = 4,1 Ohm
  • force factor BL = 3,2 N/A
  • effective piston radiating area Sd = 5,9 cm2
  • effective mechanical mass incl. air load mms = 0,32 g
  • total Q factor Qts = 0,21
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 90 mm
  • overall diameter d = 120 mm
  • mounting depth (not countersunk) t = 42 mm
PDF data sheet

open a bigger photo

Transducer Lab N28BE-A (Aluminium Voice-Coil)       order no. tl-N28BE-A       EUR 368,00 excl. VAT: € 309.24 / $ 368.00
28 mm dome tweeter with beryllium dome. The speaker has a 3 mm solid metal front plate.
  • power handling (continuous/programme) = 110 W
  • frequency range = 1200-40000 Hz
  • resonance frequency fs = 550 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 4,1 Ohm
  • force factor BL = 3,3 N/A
  • effective piston radiating area Sd = 6,7 cm2
  • effective mechanical mass incl. air load mms = 0,24 g
  • total Q factor Qts = 0,16
  • voice coil diameter = 28 mm
  • maximum peak linear excursion vibration xlin = +/- 1,2 mm
  • mounting diameter d = 90 mm
  • overall diameter d = 130x106 mm
  • mounting depth (not countersunk) t = 48 mm
PDF data sheet

open a bigger photo

Transducer Lab N28BE-G (Glass Fiber Voice-Coil)       order no. tl-N28BE-G       EUR 368,00 excl. VAT: € 309.24 / $ 368.00
28 mm dome tweeter with beryllium dome. The speaker has a 3 mm solid metal front plate.
  • power handling (continuous/programme) = 105 W
  • frequency range = 1200-40000 Hz
  • resonance frequency fs = 560 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 95,5 dB (2,83V; 1m)
  • DC resistance Re = 4,1 Ohm
  • force factor BL = 3,4 N/A
  • effective piston radiating area Sd = 6,7 cm2
  • effective mechanical mass incl. air load mms = 0,23 g
  • total Q factor Qts = 0,17
  • voice coil diameter = 28 mm
  • maximum peak linear excursion vibration xlin = +/- 1,2 mm
  • mounting diameter d = 90 mm
  • overall diameter d = 130x106 mm
  • mounting depth (not countersunk) t = 48 mm
PDF data sheet

open a bigger photo

Transducer Lab N28BER-A (Aluminium Voice-Coil)       order no. tl-N28BER-A       EUR 368,00 excl. VAT: € 309.24 / $ 368.00
28 mm dome tweeter with beryllium dome. The speaker has a 3 mm solid metal front plate.
  • power handling (continuous/programme) = 110 W
  • frequency range = 1200-40000 Hz
  • resonance frequency fs = 550 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 4,1 Ohm
  • force factor BL = 3,3 N/A
  • effective piston radiating area Sd = 6,7 cm2
  • effective mechanical mass incl. air load mms = 0,24 g
  • total Q factor Qts = 0,16
  • voice coil diameter = 28 mm
  • maximum peak linear excursion vibration xlin = +/- 1,2 mm
  • mounting diameter d = 90 mm
  • overall diameter d = 120 mm
  • mounting depth (not countersunk) t = 48 mm
PDF data sheet

open a bigger photo

Transducer Lab N28BER-G (Glass Fiber Voice-Coil)       order no. tl-N28BER-G       EUR 368,00 excl. VAT: € 309.24 / $ 368.00
28 mm dome tweeter with beryllium dome. The speaker has a 3 mm solid metal front plate.
  • power handling (continuous/programme) = 105 W
  • frequency range = 1200-40000 Hz
  • resonance frequency fs = 560 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 95,5 dB (2,83V; 1m)
  • DC resistance Re = 4,1 Ohm
  • force factor BL = 3,4 N/A
  • effective piston radiating area Sd = 6,7 cm2
  • effective mechanical mass incl. air load mms = 0,23 g
  • total Q factor Qts = 0,17
  • voice coil diameter = 28 mm
  • maximum peak linear excursion vibration xlin = +/- 1,2 mm
  • mounting diameter d = 90 mm
  • overall diameter d = 120 mm
  • mounting depth (not countersunk) t = 48 mm
PDF data sheet
The cabinet volume calculations are executed considering an external resistance of 0.3 Ohm. We are using, if no other data is known or available, the information supplied by the manufacturer.

Please note: the frequency response doesn't say much about the cut-off frequency inside the cabinet! Therefore, we mostly give you 2 examples with dimensioning considerations and an indication, how low the loudspeaker will reproduce.

Home  
 
© Copyright 2012 Iris Strassacker; All rights reserved. - errors and omissions excepted